Thanks to features like this also is possible use it as a portable PA system, because of the rugged powder coated steel pole mount installed on the side.
The advantages of the coaxial transducers are the complete absence of feedback and, thanks to the coherent wave front with a perfect dispersion control, a perfect listening in every position. The newly designed 15?+2.85? coaxial transducers guarantee anoutstanding audio quality and definition as well as an extremely lightweight of the final system.
A 4? voice coil is responsible for sounds under high power and aluminium wire drives the mid-bass cone with high efficiency and a good extension. The 2.85? dome compression driver, loaded to a 60° conical waveguide, provides a clear vocal output and a perfect high frequency extension, delivering very high headroom beforefeedback, and focusses coverage only where it?s needed, resulting in lower acoustic power on stage.
SPL and frequency response are consistent up to few metres back. The M15 CX monitor can work under high pressure with no distorsion.
The main conections board is equipped in order to configure the stage monitors for any stage situation with XLR Input and Output Link, everything designed and asembled in a cabinet made in Polywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic sides handles, integrated with the input panel, is provided for an easier transport.
Frequency response: 87 Hz - 20kHz (± 3dB) 60 Hz - 23 kHz (-10 dB)
Sensitivity (1W/1m): 98 dB
SPLMax SPL (dB@1m): 124 dB // 130 dB peak
Nominal Impedance: 8 Ohms
Power Capacity: 400 W AES* // 1600 W peak
Recommended power amplifier: 800 W @ 8 Ohms
Connections: 2 x Speakon
Nominal Beamwidth (500-4kHz): 60º ± 20º @ -6dB points
Material: 15 mm Polywood
Coaxial Transducer: LF: 1x15 with 4 voice coil wooferHF: 1x2.85 voice coil compression driver
Height/ Width / Depth: 620/ 350/ 610 mm
Weight: 20.5 Kg (45.2 lbs)
Cabinet: Rough black matte paint
Handless: 2 Sides
Pole mount cap: Yes