KIT SCPRO 4A 1

KIT SCPRO 4A 1 is a kit offered by the SCPRO Series which is composed of:

1 amplifier SCPRO 4A + 1 loudspeaker C PRO 4 + 24Vdc external supply.




Videos

Applications

Installation
SCPRO 4A:
- Adjustable Sensitivity.
- Parallel: 2 x 20W 4 Ohm (24Vdc).
- Bridge: 1 x 40W 8 Ohm (24Vdc).
- Analog Input
- Bridge mode / Parallel mode.
- Remote turn on and turn off.
- Line output.


Amplified Module:
 
SCPRO 4A
Output Power (Bridge)
1 x 40W 8 Ohm (24Vdc)
Output Power (Parallel)
2 x 20W 4 Ohm (24Vdc)
Sensitivity Vrms
225mVrms(bal) / 450mV(unbal);
sens 0dB
Output monitor Level Vrms
890 mVrms (nominal input line)
Recommended Power Supply
24 Vdc - 1.7A
THD+N
<0.08%
Function modes
Parallel / Bridge
Gain
20dB
Minimum Load
Parallel 4 Ohm /
Bridge 8 Ohm
Dimensions (WxHxD)
99x30x89 mm
Weight
240 g

Connections:
 
SCPRO 4A
Terminal block
14 pin Euroblock connector
Sensitivity
Knob from -infin to 0dB
Function mode selector
Parallel / Bridge
Input
Bal. 3 pin (IN+, IN-, GND) / Unbal. 2 pin (IN+, GND)
Shutdown function
1 pin (SD_TPA) + 1 pin GND
Monitor Output
Bal. 3 pin (Out+, Out-, GND) / Unbal. (Out+, GND)
Speaker 1
2 pin (+, -)
Speaker 2
2 pin (+, - )
Power
2 pin (24 VDC, GND)

C PRO 4 (loudspeaker):
Elements
4'' Woofer + ¾'' TWT
Low Impedance position (8 Ohm)
20W                                     
 (*) Power Taps (70V)
1,25W / 2,5W / 5W / 10W /20W                                     
(*) Power Taps (100V)
2,5W / 5W / 10W /20W                                     
Sensitivity (1W/1m)
87 dB
Frecuency Response
90Hz-20kHz
Material (front)
ABS plastic
Material (grille+dome)
Iron
Dimensions
Ø 204 x 137 mm
Mounting Hole
Ø 180mm
Weight
2,1 Kg
(*) These power taps are not operative using the amplification module.
  Manual
Download