A new bi-amplified line array system (1000W Class D) wich it incorporates on the rear part a panel where the user can adjust and set the equipment in any situation thanks to its built-in DSP and a display that shows every information as navigate through the menu and load presets, add and adjust parameters such as filter/equalization or check the temperature of the system, the IP of each box or the status of these according to their modes, such as mute, protection or shutdown (low consumption). Also is possible verify the status thanks to its different LEDs, which indicates the signal, clip, limiter and protection, all controllable as explained below:
Main technical features are its dual 10" transducers for low-mid frequencies and 1.4" compression driver with 1.75 " coil, offering in total 1000W, a frequency response from 84 Hz to the 18 kHz (± 3dB) or 129 dB maximum SPL (135 dB peak). Each box provides a horizontal dispersion of 100 ° and 35 ° vertically and has some measures 280x720x474 mm and 27 kg weight, being possible stack up as maximun 12 cabinets in line.
This new design provides the ability to connect the new SL 210 A between more than one box, offering versatility through Ethernet and high control and manipulate the system from external devices done by the new software designed and soon released by WORKPRO: WorkCAD 3 which comes fully redesigned and with libraries of presets ready to be loaded easily by the user and work with it simply.
The new SL 210 A currently has 8 presets and two customs, these last totally void for the user which are fully programmable to adapt a particular configuration and being useful for saving configurations. Using the SL 210 A and the new version of WorkCAD it is possible an easy, comfortable and fast control/adjustment system, manipulating such general equalization equipment, apply a limiter or adjust the compression, modify parameters in live for a perfect fit in the system and therefore sound quality.