The new M15CX is a stage monitor designed by WorkPro. This monitor is very compact, that is the epitome of a powerful, simple and effective design. The cabinet is made from plywood and finished a black matte ?spatter? finish, which looks discreet and neat and is easily cleaned.
The monitor has two carrying handles, one in each side, being easy transport it by one person, which are comfortable enough and more than fit for purpose, because the monitor is just 20.5Kg and measures 620 x 350 x 610mm, light weight if we realise that the transducer is 15? coaxial speaker. The grille is a strong metal material, which only has 4 small fixing screws. The monitor has been designed for touring applications, being comfortable for transported, but also it can be mounted in fixed installations thanks to the pole mount cap.
M15CX render images as prototype
In the technical features the M15CX incorporates a coaxial driver 15?+ 2.85?. The advantages of the coaxial transducers are the complete absence of feedback and, thanks to the coherent wave front with a perfect dispersion control, a perfect listening in every position. The newly designed 15?+ 2.85? coaxial transducers guarantee an outstanding audio quality and definition as well as an extremely lightweight of the final system.
A 4? voice coil is responsible for sounds under high power with no distorssion, high efficiency and a good extension. The 2.85? compression driver, loaded to a 60° conical waveguide, provides a clear vocal output and a perfect high frequency extension, the high sensitivity deliverers very high headroom before feedback, and focusses coverage only where it?s needed, resulting in lower acoustic power on stage.
M15CX in anecoic tests
M15CX in anecoic tests
The frequency response is really plane, from 87Hz until 20kHz (±3dB) and ±10dB if the frequency starts on60Hz. 800W@8 Ohms are the recommended power amplifier. The power capacity of the monitor is 400W AESand until 1600W peak with 98dB of sensitivity.
Polar pattern, SPL and Impendace graphycs
SPL and frequency response are consistent up to few metres back. The M15CX monitor can work under high pressure with no distortion. The lateral panel accommodates the necessary connections that nowadays all the passive monitors needs, an input speakon and an output to link the signal.
In this link you can find more information about it.