1. Amplificadores SLA
It is a fact, there are constantly more integrators who want to work with ultra compact devices, because f their many advantages: lightweight, easy to hide, fast to install and/or to substitute, etc. These solutions are designed for the professional field, and they have to ensure optimum results with an intensive use.
In this post we show you some of the most compact devices of WORK, designed for their installation in fixed installations
These two ultra-compact amplifiers feature a class D amplifier and respectively deliver 2x25 W and 2x150 W output power. Thanks to their reduced size and DIN-rail format, they go unperceived in the installation.
SLA amplifiers are controlled through RS 485/DMX or VCO (0-5 V). In DMX mode, the same channel controls volume and Standby. In Command mode, a set of commands is available to control each channel separately. One relevant advantage of the SLA series is that you can directly control volume with a simple 3 pin potentiometer.
NEO 3 is a ultra-compact loudspeaker (85x90 mm) directly inspired by the first models of the NEO series. It features a high performing driver for the reproduction of a wide range of frequencies.
NEO 3 is compatible with 100 V Line and 8 ? installations. When the loudspeaker is connected to low impedance, audio doesn?t go through the transformer, in order to maintain a high quality level. NEO 3 is very quick and simple to install, thanks to its new bracket specifically designed for this model. It is possible to orientate the speaker in both axis very quickly.
These two interfaces allows managing audio, lighting and videos at the same time and for several zones of an installation. The overall installation can be controlled with a smartphone, a tablet or a computer. It is very intuitive so everyone can use it without any technical knowledges.
Thanks to the OSC open protocol (www.opensoundcontrol.org), it is suitable for mobile devices (iOS and Android) and PC&MAC computers: LM-5 turns your smartphone/tablet/computer into an intuitive console for audio and lighting purposes.
LM 5 W differentiates itself from LM 5 because it has a built-in WiFi access point.
LM 3R and LM 3R2 are ArtNet nodes that respectively receive one and two DMX universes sent into an Ethernet network. Both units are compatible with ArtNet (1 and 2) and they can be controlled by any consoles that use this protocol. They are very convenient because they provide DMX signal in any parts of an installation.
BLS 2 Lite is an Independent unit of two audio channels. This affordable solution is ideal for small installations. It can be used as a simple unit to transport audio from one point to another or to several receivers. It works with PoE and/or external power supply unit.
An interesting option for integrators is to use BLS 2 Lite with BLR 2A units. The latter is a stereo IP receiver with built-in amplifier of 2x5W (connected by PoE) / 2x15W (external power supply unit). It features RS485 commands remote control to manage the selected channel, signal
level, etc. Functions can be controlled vía Ethernet (from PC, smartphone or tablet).